Kyocera Ai5555 Instruction Handbook Manual page 60

NetWare Configuration
Configure Using NetWare 4.x NetWare Directory Services
Using the Network Management Utility
System
Reset
Factory Defaults
Unit Status
Network Address
Change Password
NOTE: you will be required to enter a password to perform most of the functions. The default
factory password is "sysadm". Enter the password in lowercase.
The Main Menu shown above is for your reference while configuring
NetWare Directory Services. The procedure starts on p. 3-40.
Management Access Program NC2_317483
Main Menu
Server NC2_317483
Protocols
Setup NetWare
Setup TCP/IP
Setup AppleTalk
Home | Help | Unit Information
Ports
Configure Port Settings
Test Printer
Configure Status Page
Status Information
NetWare Configuration 3-39