Configure Using Netware 2.15 And 3.1X; Setting Up Print Queues - Kyocera Ai5555 Instruction Handbook Manual

NetWare Configuration

Configure Using NetWare 2.15 and 3.1x

Setting Up Print Queues

In the PCONSOLE Available Options menu you can make selections to
display the list of current print queues or create a new print queue to be
served by the NC-2.
Display the list of Current Print Queues
1. From the Available Options menu shown below, select the Print Queue
Information option.
Print Server Information
2. Press Enter to display the list of existing print queues.
Create A New Print Queue
1. From the Available Options menu, select Print Queue Information.
2. Press Enter to display the Print Queues list.
3. Press Insert to open the New Queue Name entry box.
4. Type the name you want to give the new queue, such as:
NC-2_Queue
5. Press Enter to add it to the list.
Repeat the procedure to create as many queues as you need.
6. Press Esc when completed to back out to the Available Options Menu.
NetWare Configuration 3-25