Installation
The NC-2 Ethernet Network Interface Card is a 5"x7" board that inserts into
a designated slot of your print controller device.
Network Protocols
q
Novell NetWare 2.15, 3.10, and later, or 4.x (Bindery and Network
Directory Services - NDS).
q
TCP/IP-UNIX networks with lpd capabilities or systems compat-
ible with SUN (Solaris 1.x, 2.x), BSD System V Release 4,
OSF1/Alpha, DEC ULTRIX 4.3 RISC, HP/UX, and SCO UNIX .
Status Light Indicators
q
Status light indicators display as green and amber LEDs on the
print controller to enable you to monitor the power-on status
and to diagnose problems.
q
You can easily troubleshoot the conditions indicated by the lights.
See Section 6, Troubleshooting.
2-2
Installation