UNIX Printing Through TCP/IP
Installing TCP/IP If Not Running lpd
The TCP/IP diskette provided with the NC-2 Print Server includes install
scripts for various UNIX systems.
This section describes how to install TCP/IP printing on the NC-2 Print
Server for any of the following operating systems:
•
DEC ULTRIX 4.3 RISC
•
System V Rel. 4
•
Solaris (Ver. 1.x, 2.x)
•
SCO UNIX
•
OSF1/ALPHA
•
IBM AIX
•
HP/UX
Once the NC-2 Print Server has its IP information loaded, the following
steps are necessary for host-side TCP/IP printing:
1. Load the print server software on your workstation.
It is presented as a tar file on the TCP/IP diskette.
2. Run the appropriate installation script, if available.
3. Complete the configuration for your operating system.
5-34 UNIX Printing Through TCP/IP