Netware Utilities Overview - Kyocera Ai5555 Instruction Handbook Manual

NetWare Configuration

NetWare Utilities Overview

This section provides information on the various NetWare utility programs
that are available to you, with emphasis on the Novell PCONSOLE utility
that is used to perform all NC-2 print server functions.
As an alternative to using PCONSOLE, the procedure using the
NWADMIN utility is provided for configuring NetWare 4.0x (NDS).
PCONSOLE is an integral part of the Network Management Utility.
Separate procedures are provided to show how to configure the NC-2 for
the NetWare version you are using.
Before users of the Novell NetWare Network Operating System can print,
the NC-2 print server must be configured according to the instructions
included in this section.
Highlights of this section are outlined below.
q How to Access the HTTP Server with an IP browser other than MAP.
q The Management Access Program (MAP) is a Windows based browser
utility. The MAP utility allows you to access the NC-2 and can be used to
activate network protocols, configure the print server and printer port, reset
NC-2 from a remote location, and troubleshoot problems. Help screen
information is included to show you how to use the MAP Utility.
q Configure Using NetWare 2.15 and 3.1x describes how to use
PCONSOLE to configure and set up NC-2 printers for printing and to set
up the Notify option.
q Configure Using NetWare 4.0x Directory Services (NDS) describes how
to use the Network Management Utility as well as the NWADMIN utility to
configure and set up the NC-2 print Server for use with version 4.0x
Directory Services.
q Configure Using NetWare 4.0x Bindery Emulation describes how to use
PCONSOLE to configure and set up the NC-2 Print Server for use with
Version 4.0x Bindery Services.
q Primary File Server explains how to define a Primary File Server and
gives you guidelines beforehand about the effect it has on your network
system.
3-2 NetWare Configuration