Making Copies On Various Types Of Paper; Making Copies On Ohp Transparencies - Konica Minolta bizhub 215 User Manual

4.5

Making copies on various types of paper

4.5 Making copies on various types of paper
4.5.1

Making copies on OHP transparencies

As an example, this section describes procedures for loading OHP transparencies into Tray1 and copying
the original on them.
1
Load the original of 8-1/2 e 11 (A4) size.
% For details on how to load the original, refer to page 3-11.
2
Adjust the guide of Tray1, and load OHP transparencies.
% When loading OHP transparencies in the w or v direc-
tion to fit the original.
% Up to 10 OHP transparencies can be loaded.
% Be sure to load the OHP transparencies below the tab,
so that the stack height does not exceed the , mark.
3
Press the Utility key.
The Utility screen appears.
4
Use +, to select [PAPER SOURCE SETUP], then press OK.
5
Use +, to select [TRAY1], then press OK.
6
Use +, to select [PAPER SIZE], then press OK.
7
Use +, to select [AUTO], then press OK.
8
Use +, to select [TRAY1], then press OK.
9
Use +, to select [PAPER TYPE], then press OK.
10
Use +, to select [TRANSPARENCY], then press OK.
bizhub 215
4
4-15