Registering A Custom Size - Konica Minolta bizhub 215 User Manual

6.4

Registering a custom size

6.4 Registering a custom size
For Save Custom Size, you can register up to two frequently used custom sizes. The custom size registered
here can be selected when you set the paper size for Tray1 by selecting [PAPER SOURCE SETUP] - [TRAY1]
- [PAPER SIZE].
<Items for Save Custom Size>
No. Settings
1 [MEMORY1]
2 [MEMORY2]
6.4.1 Registering a custom size
1
Press the Utility key.
The Utility screen appears.
2
Use +, to select [CUSTOM SIZE MEMORY], then press OK.
The screen for registering a custom size appears.
3
Use +, to select the number to be registered, then press OK.
4
Enter a value for the length (X) using the Keypad, then press OK.
% Refer to the illustration below to enter the length (X) and
width (Y) of the paper correctly.
% Enter the paper length (X) within the range from
140 mm to 432 mm.
% To correct the entered value, press Clear/Stop.
1. Length (X)
2. Width (Y)
bizhub 215
Description
Register a frequently used paper size and recall it when you set the
paper size. The following size can be registered:
Length direction: 140 mm to 432 mm
width direction: 90 mm to 297 mm.
6
6-12