Copy Setting 1 - Konica Minolta bizhub 215 User Manual

6.7

COPY SETTING 1

6.7 COPY SETTING 1
The mode when you turn on the power or press Reset is called the initial mode. COPY SETTING 1 or COPY
SETTING 2 enables you to change the initial mode settings for each copy function.
Items of COPY SETTING 1
No. Settings
1 [PAPER PRIORITY]
2 [QUALITY PRIORITY]
3 [DENSITY PRIORITY]
4 [DENSITY LEVEL] -
[DENSITY LEVEL(A)]
5 [DENSITY LEVEL] -
[DENSITY LEVEL(M)]
6 [DUPLEX PRIORITY]
7 [OUTPUT BIND POS.]
8 [ORIG. BINDING POS.]
9 [BINDING POSITION]
10 [MARGIN SETTING]
11 [ERASE SETTING]
12 [SMALL ORIGINAL]
bizhub 215
Description
Select a tray to be given priority when Auto Zoom is selected from
[TRAY1], [TRAY2], [TRAY3], [TRAY4], [TRAY5], and
[MULTI BYPASS].
• The factory default is [TRAY1].
Select the image quality when you turn on the power or reset the set-
tings from [TEXT], [PHOTO], and [TEXT/PHOTO].
• The factory default is [TEXT].
Select the density when you turn on the power or reset the settings
from [AUTO] and [MANUAL].
• The factory default is [AUTO].
Specify a density level in Auto mode from three levels.
• The factory default is
Specify a density level in Manual mode from nine levels.
• The factory default is
This item is available if the optional Reverse Automatic Document
Feeder DF-625 or Automatic Duplex Unit AD-509 is installed.
Select an original and proof copy mode when you use the automatic
2-sided printing function from [1-SIDE → 1-SIDE],
[1-SIDE → 2-SIDE], [2-SIDE → 1-SIDE], and [2-SIDE → 2-SIDE].
The factory default is [1-SIDE → 1-SIDE].
•
Select the page margin position when you use the automatic 2-sided
printing function from [LEFT], [RIGHT], and [TOP].
• The factory default is [LEFT].
Select the page margin position of the original when you use the au-
tomatic 2-sided printing function from [LEFT], [RIGHT], and [TOP].
• The factory default is [LEFT].
Specify the left page (Left Bind) or right page (Right Bind) to be
scanned first when a book original is scanned.
• The factory default is [LEFT].
Specify the page margin width within the range from 0 mm to 20 mm
in steps of 1 mm when giving margin to paper.
• The factory default is 10 mm.
Specify the erase width on the left, upper, and around the paper
when you use the frame/center erase function within the range from
4 mm to 20 mm in steps of 1 mm.
• The factory default is [LEFT]. The erase width is 10 mm.
Specify whether to [DISABLE] or [ENABLE] copying of a small size
original for which the size cannot be automatically detected.
• The factory default is [ENABLE].
.
.
6
6-20