Loading The Highly Translucent Or Transparent Original; Setting The Book Original - Konica Minolta bizhub 215 User Manual

3.6 Loading the original
3.6.3

Loading the highly translucent or transparent original

When you set the highly translucent or transparent original, such as OHP transparencies, tracing paper, and
diazo photosensitive paper, follow the below procedure.
1
Open the ADF.
2
Set the original with the side you want to copy facing down.
% Set the original along the Original Scale on the left and at the top of the Original Glass.
3
Place a blank sheet of paper that is the same size as
the original over the original.
4
Gently close the ADF.
3.6.4

Setting the book original

When setting the bound two-page spread original, follow the below procedure.
For details on the book separation copy, refer to page 5-11.
NOTICE
Do not place an original weighing more than 4-7/16 lb (2 kg) on the Original Glass. Furthermore, do not exert
strong pressure to press down on a book or any other form of original that has to be spread out on the original
glass. Otherwise, the machine may be damaged or a failure may occur.
1
Open the ADF.
2
Set the book original onto the Original Glass.
% For the original spread over two facing pages, align it
with the
Original Scale.
bizhub 215
(arrow) mark on the back-left corner of the
3
3-13