Setting The Erase - Konica Minolta bizhub 215 User Manual

5.7 Erasing a part of the original and making copies (Erase)
5.7.2

Setting the erase

1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Press Function.
The copy function screen appears.
3
Use +, to select [ERASE], then press OK.
4
Use +, to select [LEFT], [UPPER], or [FRAME], then press OK.
% If you select [LEFT], [UPPER], or [FRAME] and press ), you can specify the erase width. You can
set the erase width within the range from 4 mm to 20 mm in steps of 1 mm. Press OK.
5
Press Back to return to the basic screen.
is displayed in the basic screen.
6
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
7
Use the Keypad to specify the number of copies, then press Start.
Tips
- [LEFT] or [UPPER] for [ERASE] and the book separation copy setting, the ID copy setting, or 2 in 1/4 in
1 copy setting cannot be set at the same time.
- [FRAME] for [ERASE] and the ID copy setting or 2 in 1/4 in 1 copy setting cannot be set at the same time.
bizhub 215
5
5-14