Auto Tray Change Function; Tray Selection Order By Tray Change Function - Konica Minolta bizhub 215 User Manual

4.3 Selecting the tray
4.3.1

Auto tray change function

If the currently selected tray has run out of paper during copying or printing, this function automatically
switches to another tray to continue copying or printing.
The auto tray change function operates when a tray other than the currently selected tray meets the following
conditions.
- When paper of the same size as that of the paper in the currently selected tray is loaded
- When paper of the same type as that of the paper in the currently selected tray is loaded
- When paper is loaded in the same orientation as that of the paper in the currently selected tray
- The type of paper loaded in each tray is [PLAIN], [RECYCLE], or [1-SIDE]
- By using the Bypass Tray and Tray2/Tray3/Tray4/Tray5, you can continuously copy or print a large
number of documents. To continuously copy or print a large number of documents, set the same con-
ditions above for all trays and load paper into them.
- If all trays have run out of paper, replenish paper according to the on-screen instructions. Even if you
load paper to a tray other than the tray displayed on the screen, copy or print operations may not re-
start.
4.3.2

Tray selection order by tray change function

When the auto tray change function operates, the trays are selected in the following priority sequence.
- Tray1 ö Tray2 ö Tray3 ö Tray4 ö Tray5 ö Bypass Tray
Tips
- If Tray1 or the Bypass Tray is set to Special Paper (Transparency), the auto tray change function does
not apply to the tray. For details on how to set special paper, refer to page 4-14 or page 6-10.
- When a priority tray is set in the Utility menu, that tray is given priority. For details on the setting proce-
dure, refer to page 6-21.
bizhub 215
4
4-8