Making Copies On Envelopes - Konica Minolta bizhub 215 User Manual

4.5 Making copies on various types of paper
4.5.3

Making copies on envelopes

As an example, this section describes procedures for loading envelopes into the Bypass Tray and copying
the original on them.
Tips
- Measure the size of originals or paper of custom size before loading them. It will be convenient to use
the Original Scale.
1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Adjust the guide of the Bypass Tray, and load envelopes.
% Load the envelopes with the flap side up as shown in the illustration, so that the side on which you
want to copy the original is facing down.
% When loading envelopes, expel air from the envelopes, then hold the folds of the envelopes.
% Up to 10 envelopes can be loaded into the Bypass Tray. Do not load the envelopes up to the point
where the top of the stack is higher than the + mark.
% For details on how to enter the size, refer to page 4-16.
A screen for paper setup appears.
3
Use +, to select [TYPE], then press ).
4
Use +, to select [ENVELOPE], then press OK.
5
Press Back to return to the basic screen.
6
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
7
Press the Start key.
bizhub 215
4
4-18