Manually Making Copies (Bypass Tray) - Konica Minolta bizhub 215 User Manual

4.4 Manually making copies
4.4.6

Manually making copies (Bypass Tray)

NOTICE
Be sure to uncurl thick paper before loading it.
1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Load the paper with the side you want to copy facing down, and slightly insert it until it stops.
A screen for paper setup appears.
3
Adjust the guide and the Bypass Tray Extension to fit the paper size.
4
Use +, to select [SIZE], then press ).
5
Use +, to select the appropriate paper size, then press OK.
The screen returns to the one for paper setup.
6
Use +, to select [TYPE], then press ).
7
Use +, to select the appropriate paper type, then press OK.
% Paper type can be selected from [PLAIN], [RECYCLE], [1-SIDE], [SPECIAL], [TRANSPARENCY],
[CARD1], [CARD2], [ENVELOPE], [PLAIN 2-SIDE], [CARD1 2-SIDE], [CARD2 2-SIDE], and [RECY. 2-
SIDE].
The screen returns to the one for paper setup.
8
Press Back.
% When you want to change the size or type settings, take out the set paper and repeat Step 2 to 8.
9
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
10
Press the Start key.
bizhub 215
4
4-14