Konica Minolta bizhub 215 User Manual page 75

5.3 Configuring 2in1 or 4in1 copy settings
3
Use +, to select [2in1] or [4in1], then press OK.
% When you select [2in1] and press ), you can specify the original direction. For details on the original
direction, refer to page 4-5.
% When you select [4in1] and press ), you can specify the page order. Select [PATTERN1] or
[PATTERN2], then press OK. When you press ) next, you can specify the original direction.
Pattern 1
4
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
% If you set multiple sets, press Finishing and select [SORT].
5
Use the Keypad to specify the number of copies, then press Start.
% If you set the original on the Original Glass, the number of scans is displayed under [NEXT PAGE?]
and the number of copies. Set the next original and press OK. Repeat this operation the same
number of times as there are originals. When all pages have been scanned, press Start.
Tips
- The 2 in 1/4 in 1 copy setting and the manual zoom setting, the X/Y variable zoom ratio setting, the
mixed original setting, the book separation copy setting, the ID copy setting, the page margin setting,
or the erase setting cannot be set at the same time.
bizhub 215
Pattern 2
5
5-8