Selecting Copy Setting 1; Setting The Tray Priority; Specifying The Quality Priority - Konica Minolta bizhub 215 User Manual

6.7 COPY SETTING 1
6.7.1

Selecting COPY SETTING 1

1
Press the Utility key.
The Utility screen appears.
2
Use +, to select [COPY SETTING 1], then press OK.
The COPY SETTING 1 screen appears.
6.7.2

Setting the tray priority

1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [PAPER PRIORITY], then press OK.
3
Use +, to select a target tray, then press OK.
% If Bypass Tray is installed, the following screen appears.
This returns to the COPY SETTING 1 screen.
Tips
- If the same size and type of paper as that in the priority tray is loaded into multiple trays and they have
run out of paper, a message may appear to notify you to replenish the trays other than the priority tray
with paper. If the message appears, replenish paper according to the on-screen instructions.
6.7.3

Specifying the quality priority

1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [QUALITY PRIORITY], then press OK.
bizhub 215
6
6-21