Cisco SFS-7012 - SFS InfiniBand Server Switch 7012 Hardware User's Manual page 92

Figure 3-47 Switch Time Service
To set the system time:
From the menu, click Time Service.
Step 1
Step 2 Click Set System Time. The System Time Information screen is displayed:
Figure 3-48 System Time Information Screen
To use NTP:
Click the Use Network Time Protocol? checkbox.
Step 1
Enter the IP address for the NTP server.
Step 2
Step 3 To save, click on Apply.
Figure 3-49 Time Service - NTP Setup
To manually set the system time:
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
74
Chapter
OL-8787-04