Reset Log Levels - Cisco SFS-7012 - SFS InfiniBand Server Switch 7012 Hardware User's Manual

Chapter
Syslog Tab
Figure 3-25 Log System Configurator: Syslog Host Tab
The Syslog tab allows the user to save log files to a syslog host.
To setup the syslog host:
In the Host IP dialog box, enter the IP address of the syslog host where the log files are to be saved.
Step 1
Step 2 Click the Apply button to save the IP address.
Note
Configure Syslog on a Linux Server
Edit the /etc/sysconfig/syslog file and ensure that the -r is included in the
Step 1
SYSLOGD_OPTIONS. This allows logging from a remote system. For example:
Type /etc/init.d/syslog restart, and press Enter.
Step 2
To centralize logging for all switches in an IB fabric, the user can configure each switch to point to the
Note
same syslog server (running Linux), which has the syslog daemon (syslogd) running.

Reset Log Levels

The Reset Levels button resets the logging levels to their factory default values.
Figure 3-26 Reset Levels Button
To reset the logging levels:
From the menu, select Logging.
Step 1
Click Logging.
Step 2
Click Reset Levels. The Reset Levels window is displayed:
Step 3
OL-8787-04
Do not change the Port setting.
SYSLOGD_OPTIONS="-r -m 0"
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
57