Confirming Transmission Results; Confirming And Deleting A Copy Job; Confirming And Deleting A Pc Print Job - Canon 0860B001 User Manual

6
Press [Stop/Reset] to return to the standby display.
NOTE
For detailed information on all fax features, refer to the Facsimile Guide.

Confirming Transmission Results

Follow the procedure below to confirm the sending or receiving results.
1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <TX/RX LOG> ➞ press [OK].
NOTE
If there is no job, <NOT FOUND!> is displayed.
3
Press [((-)] or [)(+)] to confirm the sending or receiving results.
4
Press [Stop/Reset] to return to the standby display.

Confirming and Deleting a Copy Job

1
Press [Status Monitor].
7
2
Press [((-)] or [)(+)] to select <COPY STATUS> ➞ press [OK].
NOTE
•
If there is no job, <NO COPY JOBS EXIST> is displayed.
•
If there is only one copy job, go to step 4.
3
Press [((-)] or [)(+)] to confirm the job number, and the quantity of copies.
4
If you want to delete the copy job, press [OK].
5
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot be restored.
6
Press [Stop/Reset] to return to the standby display.

Confirming and Deleting a PC Print Job

1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <PRINT STATUS> ➞ press [OK].
NOTE
•
If there is no job, <NO PRINT JOBS EXIST> is displayed.
•
If there is only one print job, go to step 4.
3
Press [((-)] or [)(+)] to confirm the file name.
4
If you want to delete the print job, press [OK].
7-2