Confirming Transmission Results; Confirming And Deleting A Copy Job - Canon Color imageCLASS MF8170c Basic Manual

Confirming Transmission Results

Follow the procedure below to confirm the sending or receiving results.
Press [Status Monitor].
Press [((-)] or [)(+)] to select <TX/RX LOG> ➞ press [Set].
NOTE
If there is no job, <NOT FOUND> is displayed.
Press [((-)] or [)(+)] to confirm the sending or receiving results.
Press [Stop/Reset] to return to the standby display.

Confirming and Deleting a Copy Job

Press [Status Monitor].
Press [((-)] or [)(+)] to select <COPY STATUS> ➞ press [Set].
NOTE
If there is no job, <NO COPY JOBS EXIST> is displayed.
If there is only one copy job, go to step 4.
Press [((-)] or [)(+)] to confirm the job number, and the quantity
of copies.
If you want to delete the copy job, press [Set].
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot
be restored.
Checking the Status of the Jobs Stored in the Machine
7
7-3