Table of Contents
Advertisement
5
Load the cleaning page with the printed side facing down and wide edge with the largest blank space
entering the multi-purpose tray first.
When other paper has already been loaded in the multi-purpose tray, remove it before loading the cleaning page.
6
Press [Menu].
7
Press [((-)] or [)(+)] to select <MAINTENANCE> ➞ press [OK].
8
Press [((-)] or [)(+)] to select <ROLLER CLEANING> ➞ press [OK].
9
Press [((-)] or [)(+)] to select <START CLEANING> ➞ press [OK].
The paper will go into the printer slowly to start cleaning the fusing roller.
NOTE
It takes approximately 3 minutes to clean the roller. The cleaning process cannot be canceled. Please wait until it
ends.
Replacing the Cartridges
This section describes how to remove used cartridges and replace them with new ones.
IMPORTANT
If printout becomes faint or inconsistent, the reason may be that the lifetime of the toner cartridge has been
reached even when a message does not appear. Do not continue to use the toner cartridge when there is a
deterioration in the print quality.
8
8-3
Advertisement
Table of Contents
