Confirming Transmission Results
Follow the procedure below to confirm the sending or receiving results.
1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <TX/RX LOG> ➞ press [Set].
NOTE
If there is no job, <NOT FOUND> is displayed.
3
Press [((-)] or [)(+)] to confirm the sending or receiving results.
4
Press [Stop/Reset] to return to the standby display.
Confirming and Deleting a Copy Job
1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <COPY STATUS> ➞ press [Set].
NOTE
•
If there is no job, <NO COPY JOBS EXIST> is displayed.
•
If there is only one copy job, go to step 4.
3
Press [((-)] or [)(+)] to confirm the job number, and the quantity
of copies.
Job number
0 0 0 1
1 2 : 0 0
4
If you want to delete the copy job, press [Set].
2
1
Number
Quanyity
of pages
of copies
per copy
Checking the Status of the Jobs Stored in the Machine
7
7-3