Table of Contents
Advertisement
Copies are too dark or too light.
Q
Is the exposure adjusted correctly?
A
Adjust the exposure correctly using [Exposure]. (See "Adjusting the Exposure (Density)," on p. 5-3.)
Q
Is the machine in the toner saver mode?
A
Set <B & W TONER SAVER> to <OFF> in <COMMON SETTINGS> of the Menu. (See <3. B & W
TONER SAVER> of "Menu Descriptions," p. 10-4.)
The printouts are partly missing or shaded when you make copies on heavy paper.
Q
Is the paper type set correctly?
A
Select <HEAVY PAPER> in <PAPER TYPE> in <PAPER SETTINGS> of the Menu. (See "Specifying
the Paper Type," on p. 2-16.)
The printouts are missing when you make copies on rough paper.
Q
Is the paper type set correctly?
A
Select <TRANSPARENCY> in <PAPER TYPE> in <PAPER SETTINGS> of the Menu. (See
"Specifying the Paper Type," on p. 2-16.)
The edges of copies are dirty when you make copies.
Q
Is the paper size set correctly?
A
Specify the appropriate paper size in <PAPER SIZE> in <PAPER SETTINGS> of the Menu. (See
"Specifying the Paper Size," on p. 2-16.)
Images in which two or more colors are overlaid come out faint.
Q
Is proper paper being used?
A
Replace the paper to a type that can be used with this machine. (See "Print Media Requirements,"
on p. 2-1.)
9
9-33
Advertisement
Table of Contents
