Canon 0860B001 User Manual page 107

MEMORY FULL
Cause 1
Remedy
Cause 2
Remedy
PREPARE NEW
Cause
Remedy
PREPARE NEW DRUM
9
Cause
Remedy
PRINT NOT GUARANTEED
∗
CHECK CARTRIDGE
Cause
Remedy
PRINTER DATA ERROR
Cause
Remedy
9-26
The machine's memory is full because the collate copy or function was set when a large document is
loaded.
Divide the document and copy each part separately.
If <MEMORY FULL> appears while scanning documents by using the ADF, the document to be
scanned stops in the ADF. In this case, follow the procedure in "Removing Jammed Paper from the
ADF," on p. 9-23 to clear the jammed paper in the ADF.
You tried to reserve more than 10 copy jobs.
The machine can store up to 10 copy jobs in memory. Wait until the current copy job completes, or
use [Status Monitor] to delete the reserved copy jobs in memory.
∗
CART
A toner cartridge need to be replaced soon.
Prepare a new toner cartridge to be replaced.
∗
: indicates either "C", "M", "Y", or "K".
The drum cartridge need to be replaced soon.
Prepare a new drum cartridge to be replaced.
The installed toner cartridge cannot guarantee the print quality.
Cartridges that have low toner or made by third party vendors may cause machine malfunction.
Install a new cartridge available from Canon.
∗
: indicates either "C", "M", "Y", or "K".
When you canceled a job being processed, the next job on the spooled job list may have been also
deleted.
Check if the job that immediately follows the job being processed has been deleted on the spooled
job list. Disconnect the USB cable and connect it again, or unplug the machine and plug it in again to
clear the error message.