Adjusting The Color Balance; Adjusting The Saturation - Canon 0860B001 User Manual

Adjusting the Color Balance

You can make fine adjustments to the color by varying the relative strength and density of yellow,
magenta, cyan, and black for color copying. Color balance setting applies only to color copying. Toner
density can be specified by the following procedure.
1
Press [Menu].
2
Press [((-)] or [)(+)] to select <COPY SETTINGS> ➞ press [OK].
3
Press [((-)] or [)(+)] to select <COLOR BALANCE> ➞ press [OK].
4
Press [((-)] or [)(+)] to select the each color <BLACK>, <CYAN>, <MAGENTA> and <YELLOW> ➞ press
[OK].
5
Press [((-)] or [)(+)] or use the numeric keys to specify the toner density ➞ press [OK].
You can specify the level from between 1 and 7. A value of 5 is the default setting. For the toner density indication,
1 is the lightest and 7 is the darkest.
NOTE
5
Please refer to the table below when you adjust the color balance setting.
Adjustment on the monotone area have an instant effect on your imaging.

Adjusting the Saturation

You can adjust saturation to the appropriate level best suited for a document. Three modes are
available for adjusting the saturation level.
1
Press [Menu].
2
Press [((-)] or [)(+)] to select <COPY SETTINGS> ➞ press [OK].
3
Press [((-)] or [)(+)] to select <SATURATION> ➞ press [OK].
4
Press [((-)] or [)(+)] to select the appropriate saturation level ➞ press [OK].
You can select from the following:
- <STANDARD>
- <VIVID>
- <TRANQUIL>
5
Press [Stop/Reset] to return to the standby display.
5-4
When the preview image is yellow-looking.
When the preview image is magenta-looking.
When the preview image is cyan-looking.
When the preview image is red-looking.
When the preview image is green-looking.
When the preview image is blue-looking.
Change the yellow to lower side, or change the
magenta and cyan to higher side.
Change the magenta to lower side, or change the
yellow and cyan to higher side.
Change the cyan to lower side, or change the yellow
and magenta to higher side.
Change the yellow and magenta to lower side, or
change the cyan to higher side.
Change the yellow and cyan to lower side, or
change the magenta to higher side.
Change the magenta and cyan to lower side, or
change the yellow to higher side.