Energy Saver Mode; Setting The Energy Saver Mode Manually; Restoring From The Energy Saver Mode Manually - Canon 0860B001 User Manual

Energy Saver Mode

This machine provides an energy saver function. When no operations are performed for a specified
number of minutes, the machine automatically enters the energy saver mode.
NOTE
•
The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes.
You can also turn off the energy saver function. For details on the energy saver mode settings, see <4. ENERGY
1
SAVER> of "Menu Descriptions," on p. 10-9.
•
The energy saver function does not activate when the machine is in the following conditions:
- When printing out copies, faxes or other pages
- When sending or receiving faxes
- When scanning
- While a copy job is saved in the memory or when the collate copy or other functions are operating, or when the
- When paper jams occur
- When an error code appears and the Alarm indicator flashes
- When no paper is loaded in the cassette
- When the message<PREPARE NEW
•
The machine will be restored from the energy saver mode in the following conditions:
- When receiving print jobs from your computer
- When receiving faxes
- When you pick up the handset of the telephone connected to the machine
- When receiving a call
•
When the machine is restored from the energy saver mode, it needs to warm up before it can scan any document
or enter the energy saver mode again. The warm-up time varies (approx. 15 to 180 seconds) depending on how
long the machine was in the energy saver mode.

Setting the Energy Saver Mode Manually

1
Press [Energy Saver].
The LCD is turned off and the Energy Saver key lights up.
NOTE
Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 15
seconds before pressing [Energy Saver].

Restoring from the Energy Saver Mode Manually

1
Press [Energy Saver].
The Energy Saver key goes off and the machine enters the standby mode.
NOTE
Depending on how long it was in the energy saver mode, the machine requires approximately 15 to 180 seconds
to be fully restored from the energy saver mode.
1-6
Memory indicator lights up
∗
: indicates either "C", "M", "Y", or "K".
∗
CART> appears