Confirming Transmission Results; Confirming And Deleting A Copy Job - Canon LASERBASE MF5700 Series User Manual

3
Press [ (-)] or [ (+)] to confirm the transaction number and time.
NOTE
For the fax job with multiple destinations (sequential broadcasting), only the fax/telephone number to be sent first
is displayed.
4
If you want to delete the fax job, press [OK].
NOTE
If you delete the fax job with multiple destinations, the machine does not send the fax to any of the destinations
registered for the job.
5
If you decide to delete the job, press [ (-)] for <YES>.
NOTE
To cancel deleting the job, press [ (+)] for <NO>. Once the job is deleted, the job cannot be restored.
6
Press [Stop/Reset] to return to the standby display.
NOTE
For detailed information on all fax features, see the Facsimile Guide.

Confirming Transmission Results

7
Follow the procedure below to confirm the sending or receiving results.
1
Press [Status Monitor].
2
Press [ (-)] or [ (+)] to select <TX/RX LOG> ➞ press [OK].
NOTE
If there is no job, <NOT FOUND> is displayed.
3
Press [ (-)] or [ (+)] to confirm the sending or receiving results.
4
Press [Stop/Reset] to return to the standby display.

Confirming and Deleting a Copy Job

1
Press [Status Monitor].
2
Press [ (-)] or [ (+)] to select <COPY STATUS> ➞ press [OK].
NOTE
•
If there is no job, <NO COPY JOBS EXIST> is displayed.
•
If there is only one copy job, go to step 4.
3
Press [ (-)] or [ (+)] to confirm the job number, and the quantity of copies.
Job number
0 0 0 1
7-2
1 2 : 0 0
2 1
Number Quantity
of pages of copies
per copy