General Problems - Canon 0860B001 User Manual

General Problems

The machine has no power.
Q
Is the power cord plugged in securely?
A
Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the
power cord straight into the power socket on the back of the machine. Do not insert it at an angle.
Otherwise, the machine may not be properly connected to the power source and may not turn on. If
this happens, disconnect the power cord, and reconnect it correctly after a minute or more. (Refer to
the Starter Guide.)
Nothing appears in the LCD.
Q
Is the power cord plugged in securely?
A
Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the
power cord straight into the power socket on the back of the machine. Do not insert it at an angle.
Otherwise, the machine may not be properly connected to the power source and may not turn on. If
this happens, disconnect the power cord, and reconnect it correctly after a minute or more. (Refer to
the Starter Guide.) If the LCD remains blank, unplug the machine and wait approximately 3 minutes
to 5 minutes until the temperature inside the machine lowers, then plug it in again. If the LCD
remains blank, unplug the machine, and contact Canon Authorized Service Facilities or the Canon
Customer Care Center.
Q
Does the Energy Saver key go off?
A
When the Energy Saver key lights up, the energy saver mode activates. To restore the machine from
the energy saver mode, press [Energy Saver].
9
9-37