Table of Contents
Advertisement
Document Handling
This chapter describes the types of documents you can scan or copy with this machine and how to set them on the
platen glass.
Document Requirements
The documents you place on the platen glass or loaded in the ADF for copying, scanning, or sending
must meet these requirements:
Type of Document
Size (W x L)
Quantity
Weight
1
*
When scanning, copying, or sending a transparent document such as tracing paper or transparencies, place a piece
of plain white paper behind the document.
2
2
*
80 g/m
paper
NOTE
When making copies of a small size document, the copy speed may be slightly slower than usual.
■ Problem Documents
•
Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the
platen glass or loading it in the ADF.
•
Remove all fasteners (staples, paper clips, etc.) before loading the document in the ADF.
•
To prevent document jams in the ADF, do not use any of the following:
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Hole-punched paper
Scanned Area of a Document
The shaded area in the illustration below shows the scanned area of a document. Make sure your
document's text and graphics are within this area.
Platen Glass
Plain paper
Thick documents
Photographs
Small documents (e.g., index cards)
Special types of paper (e.g., tracing paper*
1
transparencies*
, etc.)
Book
Max. 216 mm x 297 mm
1 sheet
2 kg
Plain paper (multiple page documents of the same
size, thickness, and weight or one page
1
,
documents)
Max. 216 mm x 356 mm (LGL)
Min. 148 mm x 105 mm (A6)
2
Max. 50 sheets*
or paper stack within 8 mm
thickness including curled sheets (reference at
regular ambient temperature and humidity)
2
2
60 g/m
to 163 g/m
/document
- Carbon paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
3
CHAPTER
ADF
3-1
Advertisement
Table of Contents
