EVT_SEV_SMRY_1
EVT_SRC_SMRY_1
NOTE: You need to have the SDM installed in order to view the partition summary.
This command uses the following flags:
Table 11-5
Command
-action
-tableName
-connectFile
To View Partition Summaries:
1 Execute this command as follows:
-action viewPartitions -tableName <table name> -connectFile <filePath>
The following example, displays the list of partitions of the EVENTS table and status of each
partition.
PostgreSQL Example:
./sdm –action viewPartitions –tableName EVENTS –connectFile
sdm.connect
11.3.8 Archiving Data
Run the archiveData action after you set your archive configuration (configured in the Partition
Configuration tab in the SDM GUI). This action archives the data from the given table name
according to the archive configuration. It archives data from:
PostgreSQL
EVENTS
AUDIT_RECORDS
CORRELATED_EVENTS
EVT_DEST_EVT_NAME_SMRY_1
EVT_DEST_SMRY_1
EVT_DEST_TXNMY_SMRY_1
EVT_PORT_SMRY_1
EVT_SEV_SMRY_1
EVT_SRC_SMRY_1
280 Sentinel 6.1 Rapid Deployment User Guide
Viewing Partition Summaries Flags
Command Flags
viewPartitions
<table name>
<filePath>