Managing Sentinel 6.1 Rapid
1
Deployment Through the Web
Interface
This section discusses how to manage the services for Novell
interface.
Section 1.1, "Accessing the Novell Sentinel Web Interface," on page 19
Section 1.2, "Applications and Installers," on page 19
Section 1.3, "Reporting," on page 21
Section 1.4, "Searching Events," on page 31
1.1 Accessing the Novell Sentinel Web Interface
Use the Novell Sentinel Web interface to manage, run, schedule, and search reports, launch the
Sentinel Control Center (SCC), the Sentinel Data Manager (SDM), and the Solution Designer, and
download the Collector Manager installer and the Client installer. You can also perform full-text
search on events by using the Web interface.
1 Open a Web browser to the following URL:
https://svrname.example.com: port/sentinel
Replace
svrname.example.com
) of the server where Sentinel is running.
192.168.1.1
IMPORTANT: The URL is case sensitive.
2 If you are prompted to verify the certificates, review the certificate information, then click Yes
if it is valid.
3 Specify the username and password for the Sentinel account you want to access.
4 Use the Languages drop-down list to specify which language you want to use.
This is typically the same language as the language code of the Sentinel server and your local
computer. Make sure to configure your browser's Languages setting to support the desired
language.
5 Click Sign in.
1.2 Applications and Installers
Click Applications in the left panel of the Novell Sentinel 6.1 Rapid Deployment Web interface to
download the Sentinel components.
with the actual DNS name or IP address (such as
Managing Sentinel 6.1 Rapid Deployment Through the Web Interface
®
Sentinel
by using the Sentinel Web
TM
1
19