Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 192

3 Follow the prompts in the Add Connector Wizard.
4 Click Finish.
Deploying an Event Source
1 In the main ESM display, locate the Connector to which the new event source will be
associated.
2 Right-click the Connector and select the Add Event Source menu item.
3 Follow the prompts in the Add Event Source Wizard.
4 Click Finish.
Deploying Event Source Servers
Certain event source Connectors (such as the Syslog Connector) require a process to collect data
from the actual data source. These processes are called event source servers. They collect data from
the data source and then serve it to the event source Connector. Event source servers must be added
and associated to any event source Connectors that require a server.
1 In the Live View, right-click the Collector Manager and select Add Event Source Server. The
Select Connector window displays.
To start the Add Event Source Server Wizard, locate the Collector Manager on which the event
source server process runs.
2 Select a Connector to support your device and click Next. If you do not have any Connectors in
the list to support your device, click Install More Connectors.
192 Sentinel 6.1 Rapid Deployment User Guide