Table of Contents
Advertisement
11 If you selected Local File in
Step
7, you are prompted to upload your file to the Remote Files
virtual folder located at
.
<Install_directory>\data\map_data
12 Specify a filename and click OK.
10.7.2 Adding a Number Range Map Definition
To use the range map functionality, a map definition must have exactly one key column and the key
column must be of type NumberRange. If there are any other key columns, or if the key column is of
a different type, the mapping service does not consider the map to be a range map.
To create a range map, select a single column to be the key of the map and select NumberRange as
the type of the column. The format of the data in a column of type NumberRange must be m-n,
where m is the minimum number in the range and n is the maximum number in the range (that is,
10-200). The maximum number in the range is not included in the range (that is, [m,n)). This means
a range of 10-200 only keys off numbers equal to 10 to 199. An example set of data is with the first
column as the key:
1-2,AA
2-4,AA
4-12,BB
10-20,BB
30-31,BB
100-200,AA
110-120,CC
Number Range Map Definition
Figure 10-10
The example table is transformed to:
Table Transformation
Figure 10-11
Administration 243
Advertisement
Table of Contents
