Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 274

2 Select the table group from the drop-down list.
3 Specify the following partition configuration information:
Partition Interval: Specify the number of partitions that should be created per day or per
hour.
Days Online: Number of days of data to keep online in the database.
Archive destination: Specify the destination to store the automatically archived data and
the manually archived data.
Offline operation: Select to archive or drop the data.
Data that is dropped without archiving cannot be retrieved by using the SDM. You should
almost always select the archive option.
4 Specify the Job Schedule parameters:
Select Jobs Enabled check box if it's not selected. By default, the Jobs Enabled check box
is selected if you selected this feature during installation.
Schedule adding partitions and offline operation parameters. Click Save.
Click History to view the Job History.
Partition Job scheduling through the SDM is reflected only after the partition job refresh
interval.The default partition job refresh interval is 5 minutes.
To change the partition job refresh interval, edit the
specified in the
partitionJobRefreshInterval
the
DAS_Core
After you update the
the new refresh interval to take effect.
274 Sentinel 6.1 Rapid Deployment User Guide
/opt/novell/sentinel6_rd_x86-64/config/das_core.xml
option is provided as part of the
container.
partitionJobRefreshInterval
partitionJobRefreshInterval
Scheduler
, restart the Sentinel service in order for
option
file. The
component in