Table of Contents
Advertisement
2.3.3 Tabs
Depending on your access permissions, Sentinel Control Center displays the following tabs.
Active Views tab. For more information, see
Correlation tab. For more information, see
Incidents tab. For more information, see
iTRAC tab. For more information, see
Analysis tab. For more information, see
Admin tab. For more information, see
2.3.4 Frames
Sentinel provides a dockable framework that allows you to drag frames on the screen to place them
in your preferred locations. The following buttons allow you to drag and/ hide frames.
Toggle Floating
Toggle Auto-hide
Figure 2-4
To drag a frame to any location:
1 Click the Toggle Floating icon on the frame or hold the frame and drag it to the desired
location.
To hide a frame:
1 Click the Toggle Auto-hide icon.
NOTE: You can undo dragging or reset the framework to the default position by using the toolbar
buttons.
2.3.5 Using the Sentinel Control Center to Navigate
To navigate by using the toolbar:
1 Click the tab you need to use.
2 Click toolbar buttons to perform the actions.
To navigate by using the menu bar:
1 Click the tab menu in the menu bar.
2 Select an action you need to perform.
48
Sentinel 6.1 Rapid Deployment User Guide
Navigator Frame
Chapter 3, "Active Views Tab," on page 53
Chapter 4, "Correlation Tab," on page 83
Chapter 5, "Incidents Tab," on page 109
Chapter 6, "iTRAC Workflows," on page 123
Chapter 8, "Analysis Tab," on page 167
Chapter 10, "Administration," on page 219
Advertisement
Table of Contents
