Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 User Manual page 208

4 In the Debug Collector window, click Run
In the Source text area, the source code of the Collector appears and stops at the first line of the
text script.
5 Click the bar on the left and toggle a breakpoint in the script code, then click
next breakpoint.
Click Pause
6 After debugging is complete, click Stop
7 Click the Upload/Download tab in the debugger window.
8 Click Download and specify a location to download the script file.
9 Open the file with any JavaScript editor or a text editor.
Make your edits in the code and save the file, then click Upload.
Debug the uploaded script to have a Collector script ready to use.
Live Mode
Live debug mode requires that the Collector Manager associated with the Collector is running.
In Live debug mode, Input to the script comes from actual event sources connected to the
Collector. To get data from a specific event source, you must right-click and start the desired
event source via the ESM display. Starting/stopping event sources can be done any time during
the debug session.
208 Sentinel 6.1 Rapid Deployment User Guide
to pause debugging whenever required.
.
to stop debugging.
to go to the