Configuring Novell Sentinel With Identity Manager - Novell IDENTITY MANAGER 3.6.1 Reporting Manual

Configuring Novell Sentinel with
2
Identity Manager
Use the following checklist to verify that all of the steps are completed to install and configure
Sentinel with Identity Manager.
TM
Install and configure the Sentinel components. The Sentinel components should be a different
server from the Identity Manager server. For more information, see the
Installation Guide (http://www.novell.com/documentation/sentinel61/pdfdoc/
sentinel_61_installation_guide.pdf).
Install and Configure the Novell Sentinel Identity Manager Collector. For more information,
see Chapter 3, "Installing and Configuring the Identity Manager Collector," on page
Install and configure the Novell Audit Connector. For more information, see
"Installing and Configuring the Novell Audit Connector," on page
Install and configure the Platform Agent.
The Platform Agent (
automatically installed if either the Novell Identity Manager Metadirectory Server or Novell
Identity Manager Connected System option is selected during the Identity Manager install. It is
also installed during the installation of the User Application.
For more information on installing and configuring the Platform Agent, see
"Installing and Configuring the Platform Agent," on page
(Optional) Secure the connection between Identity Manager and the Platform Agent.
For more information, see
Select which Identity Manager events you want to log to Novell Audit.
For more information, see
Configure the Sentinel Control Center to access the Crystal Enterprise* server for the
predefined reports for Identity Manager. For more information, see
Reporting," on page
) is the client piece of the Novell auditing architecture.It is
logevent
Chapter 6, "Securing the Logging System," on page
Chapter 7, "Managing Identity Manager Events," on page
41.
Novell Sentinel
17.
21.
Chapter 9, "Querying and

Configuring Novell Sentinel with Identity Manager

13.
Chapter 4,
Chapter 5,
25.
27.
2
11