Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 82

Pointopoint=192.168.55.20
OsaInterface=<lcs|qdio> OsaMedium=<eth|tr>
For osa network devices, specify the host interface (qdio or lcs) and the phys-
ical medium (eth for ethernet or tr for token ring).
Layer2=<0|1>
For osa QDIO ethernet devices, specify whether to enable OSI Layer 2 support.
PortNo=<0|1>
For osa network devices, specify the port number (provided the device supports
this feature). If not specified, it defaults to 0.
Each of the interfaces requires certain setup options:
• Interfaces ctc and escon (CTC and ESCON are no longer officially supported):
ReadChannel=0.0.0424
WriteChannel=0.0.0425
ReadChannel specifies the READ channel to use. WriteChannel is the
WRITE channel.
• For the ctc interface (no longer officially supported), specify the protocol that
should be used for this interface:
CTCProtocol=<0/1/2>
Valid entries would be:
0
1
2
• Network device type osa with interface lcs:
ReadChannel=0.0.0124
Portname=1
70 Deployment Guide
Compatibility mode, also for non-Linux peers other than
OS/390 and z/OS (this is the default mode)
Extended mode
Compatibility mode with OS/390 and z/OS