Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 112

Figure 6.3 IBM System z: Selecting a DASD
Now specify the DASDs to use for the installation by selecting the corresponding entries
in the list then clicking Select or Deselect. After that, activate and make the DASDs
available for the installation by selecting Perform Action > Activate. See
"IBM System z: Activating a DASD"
Action > Format right away or use the YaST partitioner later as described in
"Using the YaST Partitioner"
Figure 6.4 IBM System z: Activating a DASD
To use ZFCP disks for the SUSE Linux Enterprise Server installation, select Configure
ZFCP Disks in the selection dialog. This opens a dialog with a list of the ZFCP disks
100 Deployment Guide
(page 100). To format the DASDs, select Perform
(page 227).
Figure 6.4,
Section 15.1,