Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 48

Rebooting and Connecting to the Console of the JSxx Blade
Reboot the JSxx Blade from the item Power/Restart of the Blade Tasks menu in the
BladeCenter Management Module. A table appears, showing the power status of the
blades in the Pwr column. Mark the check box of the desired blade and restart it with
Power On Blade.
Connect to the BladeCenter with the command telnet bladecenter and log in.
username: user
password: ********
system>
The command env -T system:blade[bay number] determines for which
JSxx Blade the subsequent commands are intended. The blades installed in the Blade-
Center are listed by calling list -l 3.
system> list -l 3
system
36 Deployment Guide
mm[1] primary
power[1]
power[2]
power[3]
power[4]
blower[1]
blower[2]
switch[1]
switch[3]
blade[1]
sp
cpu[1]
cpu[2]
blade[3]
sp
blade[4]
sp
blade[6]
sp
blade[8]
sp
cpu[1]
cpu[2]
blade[9]
sp
cpu[1]
cpu[2]
blade[10]
sp