Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 121

6.12.5 Add-On Products (Expert)
If you added a source for an add-on media earlier, it appears here. Add, remove, or
modify add-on products here if needed.This is the same configuration dialog as discussed
earlier in Section 6.9.1, "Add-On Products" (page 102).
6.12.6 Keyboard Layout (Expert)
To change the keyboard layout, select Keyboard Layout. By default, the layout corre-
sponds to the language chosen for installation. Select the keyboard layout from the list.
Use the Test field at the bottom of the dialog to check if you can enter special characters
of that layout correctly. Options to fine-tune various settings are available under Expert
Mode. Find more information about changing the keyboard layout in Section 8.3,
"Setting Up Keyboard and Mouse" (page 131). When finished, click Accept to return
to the installation summary.
6.12.7 Time Zone (Expert)
Adjust time zone and clock settings here. Provided a network is configured, you can
also set up a Network Time Protocol (NTP) client that automatically synchronizes your
computer with a time server. This is the same configuration as shown earlier in Sec-
tion 6.10, "Clock and Time Zone" (page 103).
6.12.8 Default Runlevel (Expert)
SUSE Linux Enterprise Server can boot to different runlevels. Normally, there should
be no need to change anything here, but if necessary set the default runlevel with this
dialog. Refer to Section "Configuring System Services (Runlevel) with YaST" (Chap-
ter 7, Booting and Configuring a Linux System, ↑Administration Guide) for more infor-
mation about runlevel configuration.
6.12.9 System (Expert)
This dialog presents all the hardware information YaST could obtain about your com-
puter. When called, the hardware detection routine is started. Depending on your system,
Installation with YaST 109