Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 292

5 Apply your settings and close the configuration file.
TIP: For More Information
For more information about YaST development, refer to
.novell.com/wiki/index.php/YaST. Detailed information about YaST
firstboot can be found at
SL11.1/tdg/inst_in_general_chap.html.
20.2.5 Configuring Additional Scripts
firstboot can be configured to execute additional scripts after the firstboot workflow
has been completed. To add additional scripts to the firstboot sequence, proceed as
follows:
1 Open the /etc/sysconfig/firstboot configuration file and make sure
2 Create your shell script, store it in the specified directory, and apply the appropri-
280 Deployment Guide
<modules config:type="list">
...
<module>
<label>my_module</label>
<enabled config:type="boolean">true</enabled>
<name>filename_my_module</name>
</module>
</modules>
4a Enter the label to display on your module in the label element.
4b Make sure that enabled is set to true to have your module included in
the workflow.
4c Enter the filename of your module in the name element. Omit the full path
and the .ycp suffix.
that the path specified for SCRIPT_DIR is correct. The default value is /usr/
share/firstboot/scripts.
ate file permissions.
http://forgeftp.novell.com/yast/doc/
http://developer