Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 47

Notes and Information
Introductory Information:
• JSxx Blades Site: https://www-304.ibm.com/systems/support/
supportsite.wss/brandmain?brandind=5000020
Preparing the System for Boot
Preparing to Boot from the CD-ROM Drive
Perform the steps described in this section if an installation from CD-ROM is desired.
Assign the CD-ROM drive to the Blade chosen for installation by connecting with a
Web browser to a BladeCenter Management Module then logging in. After login, select
the function Remote Control in the menu Blade Tasks then activate Start Remote Control.
Assign the CD-ROM drive to the desired blade in the menu Change Media Tray Owner
of the new window.
Then set up the CD-ROM drive as a boot device. Do this by selecting Blade Tasks then
Configuration while in the BladeCenter Management Module. Then select the JSxx
Blade in the section Boot Sequence. Set the entry for 1st Device on the page for Blade
Boot Sequence to CDROM.
Put CD 1 in the CD-ROM drive and restart the blade.
Preparing to Boot from the Network
Perform the steps as described in this section if an installation over the network is de-
sired.
Connect to the BladeCenter Management Module using a Web browser and log in. Set
the boot device to the network by accessing the Configuration menu from the Blade
Tasks page. Then select the JSxx Blade in the section Boot Sequence and set 1st Boot
Device to Network — BOOTP on Blade Boot Sequence.
Installation on IBM POWER 35