Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 116

the drop down lists for Region and Time Zone. When using the map, point the cursor
at the rough direction of your region and left-click to zoom. Now choose your country
or region by left-clicking. Right-click to return to the world map.
Figure 6.6 Clock and Time Zone
To set up the clock, choose whether the Hardware Clock is Set to UTC. If you run an-
other operating system on your machine, such as Microsoft Windows*, it is likely your
system uses local time instead. If you only run Linux on your machine, set the hardware
clock to UTC and have the switch from standard time to daylight saving time performed
automatically.
If a network is already configured, you can configure time synchronization with an
NTP server. Click Change to either alter the NTP settings or to Manually set the time.
See Chapter 20, Time Synchronization with NTP (↑Administration Guide) for more in-
formation on configuring the NTP service. When finished, click Accept to continue the
installation.
104 Deployment Guide