Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 219

To use a SMB mounted share as installation source, proceed as follows:
1 Boot the installation target.
2 Select Installation.
3 Press F4 for a selection of installation sources.
4 Choose SMB and enter the Windows machine's name or IP address, the share
name (INSTALL/product/CD1, in this example), username, and password.
After you hit Enter , YaST starts and you can perform the installation.
14.2.6 Using ISO Images of the Installation
Media on the Server
Instead of copying physical media into your server directory manually, you can also
mount the ISO images of the installation media into your installation server and use
them as installation source. To set up an HTTP, NFS or FTP server that uses ISO images
instead of media copies, proceed as follows:
1 Download the ISO images and save them to the machine to use as the installation
server.
2 Log in as root.
3 Choose and create an appropriate location for the installation data, as described
in Section 14.2.2, "Setting Up an NFS Installation Source Manually"
Section 14.2.3, "Setting Up an FTP Installation Source Manually"
Section 14.2.4, "Setting Up an HTTP Installation Source Manually"
4 Create subdirectories for each CD or DVD.
5 To mount and unpack each ISO image to the final location, issue the following
command:
mount -o loop path_to_iso path_to_instsource/product/mediumx
(page 200),
(page 203), or
(page 205).
Remote Installation 207