Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 37

Assigning an Installation Device to an LPAR
SUSE Linux Enterprise Server can be installed from a CD-ROM or DVD drive or using
a network installation source. Make the CD-ROM, DVD drive, or network device
available to the LPAR to install.
Figure 3.1 HMC: Server Management—Properties
Procedure 3.1 Assigning a CD-ROM or DVD Drive to an LPAR
1 Open the HMC application and go to Server and Partition > Server Management.
2 From the available servers, expand the server and partition to install.
3 Right-click the profile to use for installation and select Properties—see
"HMC: Server Management—Properties"
4 In the Logical Partition Profile Properties dialog, select the Physical I/O tab.
5 From Managed system I/O devices, select the Other Mass Storage Controller
from the bus where it is installed. To assign this DVD drive to the partition, click
Add as required.
The result should look like Figure 3.2, "HMC: Managed System I/O Devices"
(page 25).
Installation on IBM POWER
Figure 3.1,
(page 26).
25