Lpar Installation - Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual

4.2.3 Preparing the IPL of the SUSE Linux
Enterprise Server Installation System

LPAR Installation

Configure your IBM System z system to start in ESA/S390 or LINUX only mode with
an appropriate activation profile and IOCDS. Consult IBM documentation for more
about how to achieve this.
IOCDS: Attaching and Configuring Devices
A SUSE Linux Enterprise Server installation needs at least two devices: a DASD and
a network connection device. For an IPL from tape, a tape device should also be acces-
sible. Devices are configured and attached to an LPAR in the IOCDS (input output
configuration data set). This example defines one DASD, one OSA-2 network device,
and a tape device for LPAR Z1. For further information about how to set up the IOCDS
for Linux, refer to IBM hardware documentation of your machine.
Example 4.4 An Example IOCDS
CHPID PATH=(CSS(0),FD),PCHID=120,TYPE=FC
CHPID PATH=(CSS(0),FE),PCHID=320,TYPE=OSD
CHPID PATH=(CSS(0),10),PCHID=3A0,TYPE=CNC
CNTLUNIT CUNUMBR=FD00,PATH=((CSS(0),FD)),UNITADD=((00,1)),UNIT=2105
IODEVICE ADDRESS=(FD00,1),CUNUMBR=(FD00),UNIT=3390B,UNITADD=00
CNTLUNIT CUNUMBR=FE20,PATH=((CSS(0),FE)),UNIT=OSA
IODEVICE ADDRESS=(FE20,1),CUNUMBR=(FE20),UNIT=OSA
IODEVICE ADDRESS=(FEFE,1),CUNUMBR=(FE20),UNIT=OSAD
CNTLUNIT CUNUMBR=100A,PATH=((CSS(0),10)),UNIT=3480,UNITADD=((0A,1))
IODEVICE ADDRESS=(100A,1),CUNUMBR=(100A),UNIT=3480,UNITADD=00
Proceed with Section "LPAR Installation" (page 54).
Installation on IBM System z 51