Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 66

Assign the directories to the guest with DISKMAP USER DIRECT A. You can now
log in on the guest as user LINUX1.
If you do not have the dirmaint option available, refer to the IBM documentation
to set up this user.
Proceed with Section "z/VM Installation" (page 55).
4.2.4 IPLing the SUSE Linux Enterprise
Server Installation System
LPAR Installation
There are different ways to IPL SUSE Linux Enterprise Server into an LPAR. The
preferred way is to use the Load from CD-ROM or server feature of the SE or HMC.
IPL from CD-ROM
Mark the LPAR to install and select Load from CD-ROM or server. Leave the field for
the file location blank or enter the path to the root directory of the first CD-ROM then
select continue. In the list of options that appears, choose the default selection. Operating
system messages should now show the kernel boot messages.
IPL from FCP-Attached SCSI DVD
You can use the Load procedure by selecting SCSI as Load type to IPL from SCSI.
Enter the WWPN (Worldwide port name) and LUN Logical unit number) provided by
your SCSI bridge or storage (16 digits—do not omit the trailing 0s). The boot program
selector must be 2. Use your FCP adapter as Load address and perform an IPL.
IPL from ESCON or FICON Attached Tape
If you cannot IPL from DVD, create a channel attached tape from which to IPL the
SUSE Linux Enterprise Server installation image. Use the LOAD button in the SE or
HMC with the tape device address as the load address to IPL the SUSE Linux Enterprise
Server installation system.
54 Deployment Guide