Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 199

Figure 13.3 Setting Date and Time With NTP Server
1 Click Change to set date and time.
2 Select Synchronize with NTP Server.
3 Enter the address of an NTP server, if not prefilled.
4 Press Synchronize Now, to get your system time set correctly. If you want to
make use of NTP permanently, enable Save NTP Configuration.
5 Confirm with Accept.
With the Configure button, you can also open the advanced NTP configuration. For
details, see Section "Configuring an NTP Client with YaST" (Chapter 20, Time Syn-
chronization with NTP, ↑Administration Guide).
Changing Language and Country Settings with YaST 187