Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 49

blade[11]
sp
blade[13]
sp
mt
system>
The command target is then determined. To work, for example, with blade number 9,
enter env -T system:blade[9]. Connect with the console of the JSxx Blade
over Serial over LAN (SOL) with the command console.
system> env -T system:blade[9]
OK
system:blade[9]> console
Starting the Installation
The SUSE Linux Enterprise Server boot loader starts after the system check has com-
pleted.
Welcome to SuSE:SLE-11:GA!
Type "install"
Type "slp"
Type "rescue"
Welcome to yaboot version 1.3.11.SuSE
Enter "help" to get some basic usage information
boot:
Select install from the menu and press Enter .
In the case of an installation over VNC, append the parameters vnc=1 and
vncpassword=password to the command line for the kernel (install).
Additional Steps
Proceed as described in
the software with linuxrc and YaST.
to start the YaST installer on this CD/DVD
to start the YaST install via network
to start the rescue system on this CD/DVD
Chapter 6, Installation with YaST (page 89) to begin installing
Installation on IBM POWER 37