Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT Deployment Manual page 262

refer to
cific configuration is described.
To configure SMT specific data using AutoYaST, follow these steps:
1 As root, start YaST and select Miscellaneous > Autoinstallation to start the
2 Open an existing profile using File > Open, create a profile based on the current
3 Select Support > Novell Customer Center Configuration. An overview of the
4 Click Edit.
5 To register while installing automatically, select Run Product Registration. You
6 Set the URL of the SMT Server and, optionally, the location of the SMT Certifi-
7 Perform all other configuration needed for the systems to be deployed.
8 Select File > Save As and enter a filename for the profile, such as autoinst
250 Deployment Guide
Chapter 21, Automated Installation
graphical AutoYaST front-end.
From a command line, you can start the graphical AutoYaST front-end with the
yast2 autoyast command.
system's configuration using Tools > Create Reference Profile, or just work with
an empty profile.
current configuration is shown.
can include information from your system with Hardware Profile and Optional
Information.
cate. The possible values are the same as for the kernel parameters regurl and
regcert (see
Section 16.1, "Using Kernel Parameters to Access an SMT
(page 248)). The only exception is, that the ask value for regcert
Server"
does not work in AutoYaST, because it requires user interaction. If using it, the
registration process will be skipped.
.xml.
(page 285). In this section, only SMT spe-